Step 1: Charge your Eye Rejuvenator for 4-5 hours before using it for the first time. *Never use it while plugged in.
Step 2: Turn on by holding down the on/off button for 0.5 seconds. Once the blue indicator stops flashing (takes less than one minute), the device is ready to use.
Step 3: Make sure the skin is freshly cleansed, then apply an eye serum, sheet mask, or water-based cream on the orbital bone of the eye area. The skin must be damp and slippery in order to conduct the galvanic microcurrent current.
Step 4: Hold the device, making sure that your hand is making direct contact with the silver contact plate (this maintains the microcurrent connection), and slowly glide the device from the outer corner to the inner corner of your eye, pausing for 3-5 seconds on acupoints (refer to diagram). When the device beeps, switch to the other eye. The device will turn off by itself after treatment.
Step 5: There are two, timed sessions, one for each eye, followed by an auto-shutoff.
Step 6: The Eye Rejuvenator is also excellent for the lip area. Follow the same instructions above using a water-based serum or cream.
*Microcurrent is 3 mhz
Safety Precautions:
- Do not charge this device with any other charger. Only use the supplied charger.
- DO NOT GET THIS DEVICE WET.
- Keep the AC adapter and device dry. Do not store the device near water, such as a sink or tub.
- Keep out of the reach of children.
- To clean after use, wipe with a dry cloth.
- Do not operate the device while plugged in.
- Never operate this device if it has a damaged cord or plug.
- Do not wrap the cord around the appliance.
- Remove contact lenses before using.
- If you are experiencing severe skin problems, contact your dermatologist.